Daikin Altherma 3 GEO Series - To Connect the Power Consumption Digital Inputs

8 | Electrical installation
Installer reference guide
95
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
1×
2×
X2X1
LN
X2 X1
a
a Installation of EKRP1HBAA is required.
3 Fix the cable with cable ties to the cable tie mountings.
8.2.9 To connect the power consumption digital inputs
Wires: 2 (per input signal)×0.75mm²
Power limitation digital inputs: 12VDC / 12mA detection (voltage
supplied by PCB)
[9.9] Power consumption control.
1 Open the following (see "6.2.2To open the indoor unit"[455]):
1 Top panel
3
1
2
4
2 User interface panel
3 Front panel
4 Main switch box cover
2 Connect the power consumption digital inputs cable to the appropriate
terminals as shown in the illustration below.