Daikin Altherma 3 H MT W - Page 218

10 | Configuration
Installer reference guide
218
EPRA08~12EAV3+W1 + ETBH/X12EF6V+9W
Daikin Altherma 3 H MT W
4P634885-1 – 2021.03
Overview field settings
Almost all settings can be done using the menu structure. If for any reason it is
required to change a setting using the overview settings, then the overview
settings can be accessed in the field settings overview [9.I]. See "To modify an
overview setting"[4132].
Export MMI settings
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
# Code Description
[9.N] N/A Your MMI settings will be exported
to the connected storage device:
▪ Back
▪ OK
To export MMI settings
1 Open the front panel (1) and the user interface panel (2) (see
"7.2.5To open the indoor unit"[471]):
1
2
—
2 Insert a USB memory stick.
3
—
3 On the user interface, go to [9.N] Export MMI settings.
4 Select OK.
5 Remove the USB memory stick and close the user interface
panel and front panel.
—