To Next PageTo Next Page
Need help?Do you have a question about the Daikin BS4Q14AV1 and is the answer not in the manual?
General| Brand | Daikin |
|---|---|
| Model | BS4Q14AV1 |
| Category | Air Conditioner |
| Language | English |
Explains the meaning of WARNING and CAUTION symbols for hazardous situations.
Covers essential safety practices like using qualified personnel and specified parts.
Focuses on proper wiring, grounding, and circuit breakers to prevent shocks and fires.
Details procedures for refrigerant leaks and safe handling.
Addresses drain piping, interference, animal protection, and unsuitable locations.
Lists locations to avoid due to flammability, salinity, wind, or explosive atmospheres.
Verifies refrigerant type and safe handling during unpacking.
Lists accessories to verify in the packaging before installation.
Explains BS unit compatibility and capacity matching for indoor units.
Covers weight support, draining, access for service, and pipe length.
Illustrates required clearances and access points for installation.
Emphasizes secure installation to prevent units from falling.
Advises on maintenance space and preventing interference.
Details using M8-M10 bolts and foundation anchors.
Specifies placement of brackets for connection pipes.
Describes positioning, temporary securing, and using hanging brackets.
Explains how to verify the unit is level or sloped towards the drain.
Refers to outdoor unit manual and refrigerant type verification.
Stresses insulating all pipes to prevent leaks or burns.
Guides on selecting pipe sizes based on capacity and connection types.
Details pipe sizes for BS unit connections to outdoor and indoor units.
Advises on brazing techniques and using specific filler metals.
Explains brazing with nitrogen and avoiding anti-oxidizing agents.
Describes using stopper pipes for unused ports.
Outlines post-piping pressure tests.
Illustrates how to apply insulation tubes and clamps.
Covers slope, pipe diameter, and avoiding clogs.
Shows correct and incorrect drain piping configurations.
Details securing the drain hose with clamps and sealing.
Explains support brackets and sealing the drain pipe entry.
Describes checking water flow after piping is complete.
Covers authorized personnel, local codes, grounding, and power disconnection.
Shows a complete system wiring layout.
Details circuit protection, cable types, and transmission wire lengths.
Illustrates wiring connections for transmission lines.
Advises on using 2-core wiring, grounding shield wire, and terminal connections.
Details connecting transmission and power supply wires to terminal blocks.
Explains connecting power supply and earth wires, securing covers, and wire routing.
Guides on setting DIP switches for branch ports without indoor units.
Instructs on setting DIP switches for combined branch ports.
Describes post-installation checks and malfunction identification.
