Daikin FBQ60C8VEB - Page 396

Outdoor Unit: 80/90 Class SiBE121135
384 Removal Procedure
7
Disconnect the
connector for the gas
pipe thermistor [S92].
 Pull out the clamp.
 When reassembling, insert
the clamp into the small
hole.
8
Disconnect the
connector for the
thermistors [S90].
 Pull out the clamp.
 When reassembling, insert
the clamp of the thermistor
ASSY into the hole as
below.
9
The wire harness of the
thermistor is hooked
under the electrical box.
Unhook it and pull out
the clamp.
Step
Procedure Points
[S92]
(R10537)
Clamp
[S92]
(R17267)
[S90]
Clamp
(R10538)
Thermistor ASSY
(R17142)
Clamp
Hook
(R6420)
Fixing position for the
thermistor harness
 When reassembling, insert
the clamp into the small hole.