ESIE05-04 Disassembly and Maintenance
Part 5 ā Disassembly and Maintenance 5ā51
1.12.5 Removal of Swing Motor
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step Procedure Points
1 Removing the decoration
panel
Q Refer to the "Removal
of Decoration Panel"
2 Pull out the swing motor
harness from the wiring
groove.
3 Remove two mounting
screws for swing motor
mounting plate to remove
the plate.
4 Turn the horizontal vane
to downward manually,
and turn up the panel
side gear to disengage
the motor side gear.
5
Remove the swing
motor.
Fixing screw
Wiring groove
(S2647)
(S2648
To Next Page
Loading...
