11
■ To change the air flow rate setting
5. Press “FAN setting button”.
• Indoor unit quiet operation.
When the air flow is set to “ ”, the noise from the indoor unit will become quieter.
Use this when making the noise quieter.
The unit might lose power when the fan strength is set to a weak level.
NOTE
DRY mode COOL or FAN mode
The air flow rate setting is not variable.
Five levels of air flow rate setting from “ ” to “ ”
plus “ ” “ ” are available.
■
Note on COOL operation
•
This air conditioner cools the room by blowing the hot air in the room outside, so if the outside tem-
perature is high, performance drops.
■
Note on DRY operation
• The computer chip works to rid the room of humidity while maintaining the temperature as
much as possible. It automatically controls temperature and fan strength, so manual
adjustment of these functions is unavailable.
■
Note on air flow rate setting
•
At smaller air flow rates, the cooling effect is also smaller.
01_EN_3P194550-5C.fm Page 11 Thursday, May 31, 2007 4:13 PM
To Next Page
Loading...
Need help?
General
