Daikin FTKS50BVMA8 - Swing Motors

Si041253_A Swing Motors
Removal Procedure 11
8. Swing Motors
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1. Remove the swing motor
for horizontal blades.
1
Remove the screw of
the swing motor.
2
Remove the swing
motor.
2. Remove the swing motor
for vertical blades.

Remove the swing shaft.
1
Remove the swing shaft
on the right side.
2
Remove the 2 screws
and detach the swing
motor unit.
3
Remove the 2 screws
and remove the swing
motor.

The assembly has 6 hooks.
(R17748)
Swing motor
(R2789)
(1) Unfasten the hook.
(2) Pull out the swing shaft.
(R12896)
(R17919)
Swing motor unit
Hook
Hook
Swing motor
(R2792)