4 Operation
Operation manual
12
(C)(F)TXA15~50A2V1B(W)(S)(T)
Daikin room air conditioner
3P485919-7C – 2017.12
3 Press to exit the confirmation mode.
4.6.4 To deactivate and reactivate Weekly timer
operation
1 To deactivate the Weekly timer, press while
is displayed on the LCD.
Result: disappears from the LCD and the timer lamp goes
off.
2 To reactivate the Weekly timer, press again.
Result: The last set reservation mode will be used.
4.6.5 To delete reservations
To delete individual reservations
Use this function if you want to delete a single reservation setting.
1 Press .
Result: The day of the week and the reservation number are
displayed.
2 Press or to select the day of the week to be deleted.
3 Press .
Result: , , and blink.
4 Press or and select "blank".
Result: The setting will change as follows:
5 Press .
Result: The selected reservation is deleted.
6 Press to exit.
Result: Remaining reservations will be active.
To delete a reservation for each day of the week
Use this function of you want to delete all reservation settings for
one day of the week. This can be used in confirmation or setting
mode.
1 Press or to select the day of the week to be deleted.
2 Hold for about 5seconds.
Result: All reservations for the selected day will be deleted.
To delete all reservations
Use this function if you want to delete all reservations for all days of
the week in one go. This procedure CANNOT be used in the setting
mode.
1 Hold for about 5seconds while in the default display.
Result: All reservations will be deleted.
4.7 Wireless LAN connection
The customer is responsible for providing:
▪ Smartphone, tablet or another smart device with one of the
following operating systems:
▪ Android 4.0.3 or later
▪ iOS 7.1.2 or later
▪ Internet line and communication device, such as a modem, router,
etc.
▪ Wireless LAN access point
▪ Installed free Daikin Online Controller application
Note: If needed, the SSID number and the KEY are located on the
unit or can be found in the accessory bag.
a Label with SSID number and password
4.7.1 Precautions when using the wireless
adapter
Do NOT use near:
▪ Medical equipment. E.g. persons using cardiac pacemakers or
defibrillators. This product may cause electromagnetic
interference.
▪ Auto-control equipment. E.g. automatic doors or fire alarm
equipment. This product may cause faulty behaviour of the
equipment.
▪ Microwave oven. It may affect wireless LAN communications.
4.7.2 To install the Daikin Online Controller
application
1 Open:
▪ Google Play for appliances using Android.
▪ App Store for appliances using iOS.
2 Search for Daikin Online Controller.
3 Follow the directions on the screen to install.
4.7.3 To set the wireless connection
There are two options to connect the wireless adapter with your
smart device.
▪ Connect the wireless adapter to your home network. The
wireless adapter will communicate with your smart device in your
home network using a modem, router or a similar device.
▪ Connect the wireless adapter to your smart device directly.
For more information and FAQ refer to:
http://www.onlinecontroller.daikineurope.com/.
1 Stop the operation before setting the wireless connection.
To confirm the wireless adapter connection status
1 Press for at least 5seconds.
Result: The confirmation display (menu ) appears.
2 Press to confirm the selection.
Result: is blinking.
3 Check the indoor unit LED.
…lamp is blinking. Status
Timer Communication is OK