Daikin FTXA20A2V1BW - User Safety Guidelines

3 Before operation
Operation manual
5
(C)(F)TXA15~50A2V1B(W)(S)(T)
Daikin room air conditioner
3P485919-7C – 2017.12
2
3
1
AAA.LR03
3.3 Clock
If the indoor unit's internal clock is NOT set to the correct time, the
ON timer, OFF timer and weekly timer will NOT operate correctly.
The clock must be set again:
▪ After a circuit breaker has turned the unit OFF.
▪ After a power failure.
▪ After replacing batteries in the user interface.
3.3.1 To set the clock
Note: If the time is NOT set , , and blink.
1 Press .
Result: and blink
2 Press or to set the current day of the week.
Note: Holding down or increases or decreases the time
setting rapidly.
Display Day of the week
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
3 Press .
Result: blinks.
4 Press or to set the correct time.
5 Press .
Result: Setting is complete. blinks.
3.4 Brightness of the indoor unit
display
Adjust the brightness of the indoor unit display as desired, or turn
OFF the display.
3.4.1 To set the brightness of the indoor unit
display
1 Press for at least 2seconds.
Result: The menu appears on the display. is blinking.
2 Press .
3 Press or to change the setting as follows:
…is blinking Brightness is…
High
Low
Off
4 To confirm the selected setting, press .
Result: The brightness setting is changed.
Note: The display automatically returns to the default screen after
60seconds. To return to the default screen sooner, press
twice.
3.5 To turn on the power supply
1 Turn the circuit breaker on.
Result: The flap of the indoor unit will open and close to set the
reference position.
3.6 To change indoor unit position
setting
Set the indoor unit position to avoid direct airflow to walls.
1 Press for at least 2seconds.
Result: The menu appears on the display.
2 Press or to change the menu to .
Result: The menu appears on the display. blinks.
3 Press to select the menu.
Result: blinks.