Daikin FTXA20A2V1BW - Page 30

5 | Operation
User reference guide
30
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518786-1F – 2020.05
4 Press or to select the mode.
Result: The setting will change as follows:
Display Feature
ON timer
OFF timer
Blank Deletes reservation
5 Press .
Result: The ON/OFF timer mode is set. and the time blink.
Note: Press to return to the previous screen. If blank is selected, continue
to step 9.
6 Press or to select the time. The time can be set between 0:00~23:50 in
10-minute intervals.
7 Press .
Result: The time is set and and the temperature blink.
Note: Press to return to the previous screen. If OFF timer is selected,
continue to step 9.
8 Press or to select the desired temperature.
Note: The set temperature for the weekly timer is displayed only when setting the
weekly timer mode.
INFORMATION
The temperature can be set between 10~32°C on the user interface, however:
▪ in cooling and automatic operation mode, the unit will operate at minimum 18°C
even if is set at 10~17°C;
▪ in heating and automatic operation mode, the unit will operate at maximum 30°C
even if is set at 31~32°C.
9 Press .
Result: The temperature and time are set for the ON timer. The time is set for
the OFF timer. The timer lamp lights orange.
Result: A new reservation screen will appear.
10 Repeat the previous procedure to set another reservation or press to
complete the setting.
Result: is displayed on the LCD.
Note: A reservation can be copied with the same settings to another day. Refer to
"5.11.2To copy reservations"[431].