Daikin FTXA25A2V1BW - To Set Weekly Timer Operation; To Copy Reservations; To Confirm Reservations

4 Operation
Operation manual
11
(C)(F)TXA15~50A2V1B(W)(S)(T)
Daikin room air conditioner
3P485919-7C – 2017.12
INFORMATION
▪ Weekly timer and ON/OFF timer operation CANNOT be
used at the same time. The ON/OFF timer operation
takes priority. Weekly timer will be in standby,
disappears from the LCD. When the ON/OFF timer is
completed, the Weekly timer becomes active.
▪ The day of the week, ON/OFF timer mode, time and
temperature (only for ON timer) can be set with the
Weekly timer. Other settings are based on previous ON
timer setting.
4.6.1 To set Weekly timer operation
1 Press .
Result: The day of the week and the reservation number of the
current day are displayed.
2 Press or to select the day of the week and the
reservation number.
3 Press .
Result: The day of the week is set. and blink.
4 Press or to select the mode.
Result: The setting will change as follows:
Display Feature
ON timer
OFF timer
Blank Deletes reservation
5 Press .
Result: The ON/OFF timer mode is set. and the time
blink.
Note: Press to return to the previous screen. If blank is
selected, continue to step 9.
6 Press or to select the time. The time can be set
between 0:00~23:50 in 10minutes intervals.
7 Press .
Result: The time is set and and the temperature
blink.
Note: Press to return to the previous screen. If OFF timer
is selected, continue to step 9.
8 Press or to select the desired temperature.
Note: The set temperature is only displayed when the mode setting
is on.
9 Press .
Result: Temperature and time are set in ON timer. Time is set
in OFF timer. Timer lamp lights orange.
Result: New reservation screen will appear.
10 Repeat the previous procedure to set another reservation or
press to complete the setting.
11 Press to complete the setting.
Result: is displayed on the LCD.
Note: A reservation can be copied with same setting to another day.
Refer to "4.6.2To copy reservations"on page11.
4.6.2 To copy reservations
A reservation can be copied to another day. The complete
reservation of the selected day of the week will be copied.
1 Press .
2 Press or to select the day of the week to be copied.
3 Press .
Result: The reservation of the selected day of the week will be
copied.
4 Press or to select the destination day.
5 Press .
Result: The whole reservation is copied to the selected day and the
timer lamp lights orange.
Note: To copy to another day, repeat the procedure.
6 Press to complete the setting.
Result: is displayed on the LCD.
Note: To change the reservation setting after copying, refer to
"4.6.1To set Weekly timer operation"on page11.
4.6.3 To confirm reservations
You can confirm if all reservations are set to your needs.
1 Press .
Result: The day of the week and the reservation number of the
current day are displayed.
2 Press or to select the day of the week and reservation
number to be confirmed and check the reservation details.
Note: To change the reservation setting, refer to "4.6.1 To set
Weekly timer operation"on page11.