3 | About the system
User reference guide
10
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518786-1F – 2020.05
f Service cover
g Intelligent eye sensor
h Display
i Room temperature and humidity sensor
j ON/OFF button and operation lamp (green)
k Signal receiver
l Timer lamp (orange)
m Intelligent eye lamp (green)
n Wireless adapter ON/OFF button
o Louvers (vertical blades)
p Flaps (horizontal blades)
Note: Position of titanium apatite deodorizing filter and silver particle filter is
interchangeable.
ON/OFF button
If the user interface is missing, you can use the ON/OFF button on the indoor unit
to start/stop operation. When operation is started using this button, the following
settings are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic
3.2 About the user interface
▪ Direct sunlight. Do NOT expose the user interface to direct sunlight.
▪ Dust. Dust on the signal transmitter or receiver will reduce sensitivity. Wipe off
dust with a soft cloth.
▪ Fluorescent lights. Signal communication might be disabled if fluorescent lamps
are in the room. In that case, contact your installer.
▪ Other appliances. If the user interface signals operate other appliances, move
the other appliances, or contact your installer.
▪ Curtains. Make sure that the signal between the unit and the user interface is
NOT blocked by curtains or other objects.
NOTICE
▪ Do NOT drop the user interface.
▪ Do NOT let the user interface get wet.
To Next Page
Loading...
