19
Care and Cleaning
Filters
1. Pull out the air lters.
• Open the front panel.
• Push a little upwards the tab at the center of each air
lter, then pull it down.
2. Take off the titanium apatite
photocatalytic air-purifying lter.
• Hold the recessed parts of the frame and unhook the
4 claws.
Filter frame
Claw
Air lter
Titanium apatite
photocatalytic
air-purifying lter
3. Clean or replace each lter.
3-1 Air lter
3-1-1 Wash the air lters with water or clean
them with vacuum cleaner.
• If the dust does not come off easily, wash
them with neutral detergent thinned with
lukewarm water, then dry them up in the
shade.
• Be sure to remove the titanium apatite
photocatalytic air-purifying lter.
• It is recommended to clean the air lters
every 2 weeks.