■
To start COMFORT AIRFLOW operation
Press .
•
COMFORT AIRFLOW Operation
The air direction and flow rate are adjusted so that the air will not blow directly at
people in the room.
“ ” is displayed on the LCD.
COOL and DRY
operation
HEAT operation FAN ONLY operation
Flap direction
Goes up Goes down
Not available
AUTO
Airflow rate
■
To cancel COMFORT AIRFLOW operation
Press again.
•
“ ” disappears from the LCD.
•
The flap will return to the memory position from before COMFORT AIRFLOW operation.
t
The flap position will change, preventing air from blowing directly on the occupants of the room.
t
POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
t
The airflow rate will be set to AUTO. If the upper and lower airflow direction is selected,
the COMFORT AIRFLOW operation will be canceled.
t
The flow of air will be in the upward direction while in COOL operation and in the downward
direction while in HEAT operation, which will provide a comfortable wind that will not come in direct contact with people.
HEAT operation COOL operation
Notes on COMFORT AIRFLOW operation
13
To Next Page
Loading...
