CAUTION
When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
After cleaning, make sure that the front panel is securely fixed.
Remove the front panel.
1.
Open the front panel.
Slide the front panel to either the left or right and
pulling it toward you.
This will disconnect the front panel shaft on one
side.
Disconnect the front panel shaft on the other
side in the same manner.
Clean the front panel.
2.
Wipe it with a soft cloth soaked in water.
Only neutral detergent may be used.
In case of washing the panel with water, wipe it
with dry soft cloth, dry it up in the shade after
washing.
Attach the front panel.
3.
Align the front panel shaft on the left and right of
the front panel with the slots, then push them all
the way in.
Close the front panel slowly. (Press the panel at
both sides and in the central area.)
Front panel
To Next Page
Loading...
