EasyManua.ls Logo

Daikin FTXJ20A2V1BW - Opening the Unit; To Open the Front Panel; To Remove the Front Panel

Daikin FTXJ20A2V1BW
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 | Unit installation
Installer reference guide
24
FTXJ-A(W)(S)(B)
Daikin room air conditioner
4P518023-12K – 2022.05
6.2 Opening the unit
6.2.1 To open the front panel
1 Hold the front panel on both sides and pull it up carefully until it reach the
limit position.
2 Pull down both locks on the back of the front panel.
3 Open the front panel until the support fits into the fixing tab.
d
c
b
a
a Lock (1 on each side)
b Backside of the front panel
c Fixing tab
d Support
6.2.2 To remove the front panel
INFORMATION
Remove the front panel only in case it MUST be replaced.
1 Open the front panel. See "6.2.1To open the front panel"[424].
2 Open the panel locks on the back side of the panel (1on each side).
a
a
a Panel lock
3 Push the right arm lightly to the right to disconnect the shaft from the shaft
slot on the right side.

Table of Contents

Other manuals for Daikin FTXJ20A2V1BW

Related product manuals