Daikin FTXJ20A2V1BW - To Drill a Wall Hole

6 | Unit installation
Installer reference guide
28
FTXJ-A(W)(S)(B)
Daikin room air conditioner
4P518023-12K – 2022.05
4 Finish the installation by securing the mounting plate on the wall using
M4×25L screws (field supply).
INFORMATION
The removed pipe port cover can be kept in the mounting plate pocket.
44.5
605
17
101
779
150
155
44.5
± 495 mm
± 430 mm
± 375 mm
Ø65
Ø65
f
j
i
d
k l
m
a
g
f
a
h
h
b
e
c
a a
a
a
a
a
290
a Recommended mounting plate fixing spots h Hole for embedded piping Ø65mm
b Pocket for the pipe port cover i Value for tape measure
c Liquid pipe end j Position for tape measure at symbol " "
d Gas pipe end k Drain hose
e Use tape measure as shown l Liquid pipe
f Tabs for placing a spirit level m Gas pipe
g Unit center
6.3.2 To drill a wall hole
CAUTION
For walls containing a metal frame or a metal board, use a wall embedded pipe and
wall cover in the feed-through hole to prevent possible heat, electrical shock, or fire.