6 | Unit installation
Installer reference guide
25
FTXJ-A(W)(S)(B)
Daikin room air conditioner
4P518023-12K – 2022.05
a Arm
b Shaft slot
c Shaft
4 Disconnect the front panel shaft from the shaft slot on the left side.
a Arm
b Shaft slot
c Shaft
5 Remove the front panel.
6 To re-install the front panel, perform the steps in the opposite order.
6.2.3 To open the service cover
1 Remove 1 screw from the service cover.
2 Pull out the service cover horizontally away from the unit.
a Service cover
b Service cover screw
NOTICE
When closing the service cover, make sure that the tightening torque does NOT
exceed 1.4(±0.2)N•m.