13
Press
Adjusting the Airflow Direction
and Rate
You can adjust the airflow direction to increase your comfort.
To start auto swing
Upper and lower airflow direction
• “ ” is displayed on the LCD.
• The louver (horizontal blade) will begin to swing.
To set the louver at desired position
• This function is effective while louver is in auto swing mode.
Press when the louver has reached the
desired position.
• The louver will stop moving.
• “ ” is no longer displayed on the LCD.
To adjust the fins (vertical blades)
Hold the knob and move the fins.
(You will find a knob on the left-side and the right-side
blades.)
• When the unit is installed in the corner of a room, the
direction of the fins should be facing away from the wall.
If they face the wall, the wall will block off the wind,
causing the cooling (or heating) efficiency to drop.
.
To Next Page
Loading...
