Daikin FTXN09KEVJU - Page 159

Optional Accessories EDUS041111_a
158 Room Air Conditioners K-Series
12
1 Press
to select the ONE TIME timer.
2 Press .
3 Press to make the ON timer setting.
Example of display with the ONE TIME timer programmed
 ONE TIME timer
Once the timer has been activated and then deactivated, it is in the OFF mode.
The ON or OFF timers can be programmed.
light up.
ONE TIME
blinks.
 Each time the button is pressed,
the setting changes in a 10-
minute increment or decrement.
Hold the button down to advance
quickly.
When the ON timer is not used,
save the setting as
4 Press .
5 Press
to make the OFF timer setting.
6 Press .
(The ONE TIME timer is now programmed.)
Both of the ON and OFF time
cannot be set as
blinks.
When the OFF timer is not used,
save the setting as .
ONE TIME timer
programmed.
The set time is
displayed.
ON timer activated
and system starts.
The ON timer setting
no longer displays.
OFF timer activated,
and system stops.
The timer setting no
longer displays.
Notes
 In the following cases, reset the
clock (the time setting is kept in the
memory).
 The circuit breaker has been
activated.
 The power fails.