Daikin FTXN12KEVJU - Page 169

SiUS041111 Indoor Unit: 15/18/24 Class
Removal Procedure 161
7
Unfasten the 2 hooks
on the lower side, and
then the 2 hooks on the
upper side.
Remove the control
PCB.
[S1]: DC fan motor
[S6]: swing motor for horizontal
blades
[S26]: buzzer PCB
[S28]: signal receiver PCB
[S32]: indoor heat exchanger
thermistor
 Refer to page 15 for detail.
3. Remove the swing motor
for horizontal blades.
1
Remove the screw of
the swing motor.
2
Remove the swing
motor.
Step Procedure Points
Upper hook
Lower hook
Control PCB
(R2785)
[S1]
[S6]
[S26]
[S28]
[S32]
(R14257)
Swing motor
(R2788)