Daikin FTXN25KEV1B - Removal of Electrical Box; PCB

Outdoor Unit SiBE041102_A
122 Removal Procedure
2.3 Removal of Electrical Box / PCB
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
1. Remove the PCB. Preparation

Remove the panels
according to the “Removal
of Outer Panels”.
1
Remove the screws
and release the
connecting wires.
2
Remove the 3 screws
and remove the wire
clamp.
3
Disconnect the
connector [S70] and
release the fan motor
lead wire from the hook.
[S70]: fan motor
4
Release the fan motor
lead wire from the 3
hooks.
(R14496)
(R14497)
Wire
clamp
[S70] Hook
Fan motor
lead wire
(R14491)
(R14492)