To Next PageTo Next Page
Need help?Do you have a question about the Daikin FXAQ20PVE and is the answer not in the manual?
General| Brand | Daikin |
|---|---|
| Model | FXAQ20PVE |
| Category | Air Conditioner |
| Language | English |
Defines WARNING and CAUTION levels for potential hazards and injuries.
Ensures safe installation by qualified personnel, proper electrical work, and correct parts usage.
Addresses risks from refrigerant leaks, frostbite, electrical interference, and unsuitable installation environments.
Precautions for moving units and verifying correct refrigerant type (R410A) before installation.
Guidance on selecting suitable installation sites and ensuring installation by qualified professionals using specified parts.
Details the included accessories and available optional remote controller types for the unit.
Lists essential checks before handover and emphasizes explaining the unit's operation and safety features.
Lists essential criteria for choosing an appropriate installation location for optimal performance and access.
Details measures to prevent electrical interference and ensure proper airflow throughout the room.
Steps for preparing the wall, mounting the installation panel securely, and ensuring proper drainage slope.
Instructions for routing refrigerant and drain pipes, and managing internal components for proper connection.
Detailed steps for safely hanging the indoor unit on the panel and securing it with screws, ensuring wiring is managed correctly.
Emphasizes using R410A-specific tools and techniques for safe and effective flare connections.
Provides precise specifications for flare nut tightening torque and angles to ensure leak-free connections.
Details safe brazing practices, nitrogen purging to prevent oxidation, and thorough insulation of all piping.
Instructions for installing the drain pipe with a proper downward slope and extending it with insulation.
Procedure for verifying proper drainage and important cautions regarding drain pipe connections to prevent damage.
Outlines fundamental requirements for electrical wiring, including qualified personnel, proper materials, and safety measures.
Provides model-specific electrical data, required wire types and fuses, and critical cautions for wiring.
Details how to connect various wires to terminal blocks and the specific torque required for secure connections.
Specific instructions and precautions for connecting the power supply wiring, including terminal types and wire preparation.
Step-by-step guide for connecting various electrical wires to the unit's terminal blocks.
Illustrates different system setups, including single/multiple indoor units, group control, and BS unit integration.
Explains how to set up and use multiple remote controllers, forced off functions, and centralized control systems.
Outlines the basic steps and precautions for configuring unit settings using the remote controller.
Details how to adjust settings for air filter maintenance reminders and airflow rate adjustments.
Procedures for conducting the final test run, interpreting error codes, and verifying unit operation.
Instructions to protect the unit after testing and to perform final checks as per delivery requirements.
