10 - 15 mm
10 - 15 mm
70 - 90 mm
70 - 90 mm
Approx.
7 mm
L
N
LN
Remote
controller wiring
Transmission
wiring
Forced
off
P1 P2 F1 F2 T1 T2
Earth
wiring
Power supply wiring/
earth wiring
Wiring penetrating
hole (high voltage)
Earth terminal
Control box lid
[Remote controller wiring, Tr ansmission wiring]
[Power supply wiring, Earth wiring]
Sheathed part of
remote controller wiring,
transmission wiring
• Do not connect the power supply wiring (high voltage).
R10
or more
R10
or more
Strand the
wirings after
sheath is
peeled off.
After the wirings are clamped,
cut off the extra part.
After the
wirings are
clamped, cut
off the extra
part.
(Sheath peeling
off allowance.)
(Sheath peeling
off allowance.)
Clamp (4)
Clamp (4)
Wiring
penetrating
hole (low
voltage)
Te rminal block for
power supply wiring/
earth wiring (3P)
Te rminal block for
remote controller wiring/
transmission wiring (X1M)
Wiring diagram label
(on backside of control box lid)
Printed Circuit
Board
Sheathed
part
Prohibited
Transmission
wiring
Remote
controller wiring
Fig. 23
13 3P335596-2D English
To Next Page
Loading...
