Part 3. Commissioning Procedure
114 Design Guide DCM014A51
4.2 CSV Configuration
1. How to export the CSV file.
a. Insure that all indoor units have been added/recognized before exporting the CSV file — set
indoor unit name (ex. Room 101), enable Unocc Setpoints, Setpoint Range Limitation and
configure Auto-changeover in the iTM.
b. Click the Service Settings tab for the iTM.
c. Click the [BACnet® Server/Gateway] icon (only appears when the BACnet Server Gateway
option is activated).
d. Insert the USB memory device into the iTM USB port.
e. Click the [Export Configuration Data] button to download iTM BACnet® Server Gateway CVS
file to the USB drive.
BACnet
Server/
Gateway
/Gateway
To Next Page
Loading...
