Daikin Perfera ATXM25R - Page 150

3 | Components
Service manual
150
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01
4 Attach the DC fan motor harness to the switch box.
5 Install a new tie strap to fix the DC fan motor harness to the switch box.
6 Connect the DC fan motor connector to the connector on the main PCB.
7 Lock the ferrite bead.
a
b
f ee
c
d
a Tie strap
b DC fan motor harness
c Switch box
d Fan motor bracket
e Screw
f DC man motor assy
8 Route the DC fan motor harness through the harness retainers (at the back of
the fan motor bracket) and bend the harness retainers to attach the DC fan
motor harness.
9 Attach the DC fan motor harness to the switch box.
10 Install a new tie strap to fix the DC fan motor harness to the switch box.
11 Connect the DC fan motor connector to the connector on the main PCB.
12 Install the propeller fan blade assembly, see "Repair procedures"[4148].
To install the propeller fan blade assembly
1 Install the propeller fan blade assembly on the DC fan motor assembly.
CAUTION
Do NOT install a damaged propeller fan blade assembly.
2 Install and tighten the nut to fix the propeller fan blade assembly.
a b