IM 1267-7 • PRECISELINE AIR HANDLER 22 www.DaikinApplied.com
Figure 44: Vertical Units Sizes 030-050 DX Coil Drill Area
Table 8: Horizontal Drill Area Locations – DX Only and DX
with Preheat
M
30 29.18 6.35
40 32.18 6.35
50 32.18 6.35
30
29.18 11.35
40
32.18 11.35
50
32.18 9.35
30
29.18 6.62
40
32.18 7.62
50
32.18 6.62
30
29.18 7.35
40
32.18 7.62
50
32.18 7.35
M
30 29.18 6.65
40 32.18 6.62
50 32.18 6.62
30 29.18 7.35
40 32.18 7.35
50 32.18 7.35
Table 9: Horizontal Drill Area Locations – DX with Reheat
M
30 27.13 6.61
40 30.14 7.65
50 30.14 6.62
30 27.13 7.35
40 30.14 7.62
50 30.14 7.35
30 27.13 6.62
40 30.14 6.62
50 30.14 6.62
30 27.13 7.35
40 30.14 7.35
50 30.14 7.35
top of pan and verify that the normally closed switch opens.
sequence, the action of the factory installed switch can be
described above to verify the switch closes when water rises
to within 1/4" of the top of the pan.
To Next Page
Loading...
Need help?
General
