Controller
DGS01
Operating Guide
1 Transmission Source
• The source where the signal will be transmitted.
2 Signal Transmission Indication
• Blink to confirm that the last setting has been transmitted to the unit.
3 “ON/OFF” Button
• Press once to start the air conditioner unit.
• Press again to stop the unit.
4 Fan speed selection
• Press the button continuously will toggle the fan speed in the following order:
Low � Med � High � Auto
• Stop pressing when the desired fan speed appears on the display screen.
5 Operation mode
• Press the MODE button to select the type of operating mode.
• For cooling only unit, the available modes are: COOL ( ), DRY ( ) and FAN ( ).
6 Automatic air swing
• Press the SWING ( ) button to activate the automatic air swing function.
• To distribute the air to a specific direction, press the SWING ( ) button and wait until the louver
move to the desired direction and press the button once again.
7 Turbo function
• Press for fast cooling operation.
• Fan speed turn to maximum speed.
• Press again to deactivate the function.
• Available under COOL and DRY modes only.
• Any change of fan speed will deactivate this function.
TURBO QUIET
SLEEP
ON OFF
MODE
TIMER
CANCEL
CANCEL
CLOCK
3
13
4
9
12
7
1
2
5
6
8
10
11
To Next Page
Loading...
