How to Remove Air Inlet Grille
1. Remove the air inlet grille by both hands as
the direction shown.
2. Loosen the screw for fi xing the panel arm (3
screw, left, right and center). Do not remove
the screw at this time.
3. Move the air inlet grille upward, and then turn
it backwards. (Do not use too much force).
4. Remove the grille holder (both left and right
side). After that, remove the air intake grille.
5.
Remove the grille holder (center) from the panel.
Air Inlet Grille
Axis of the Front Panel
Rib
Grille Holder (Center)
(Optional)
Screw
Air Inlet Grille Holder
Grille Holder (Center)
Grille Holder (L/R)
How to Install the Air Filter
(A)
(A)
(B)
(B)
Snap in the filter in order to secure it
Install the filter to the panel in the (A) direction
follow by (B) to secure the filter.
To Adjust the Vane Direction
Dimension of the fresh air intake hole
Adjust the vane linkage as the direction shown to get
the required vane direction
70mm
Ø 3mm
70mm
Ø 64mm
To Next Page
Loading...
