Si20-701_B Troubleshooting by Remote Controller
56
(2)Taking corrective action
· Press the Menu/Enter button to check the error code.
· Take the corrective action specific to the model.
3.1.3 Wireless Remote Controller
If unit stops due to an error, the operation indicating LED
on the signal receiving part of indoor unit blinks.
The error code can be determined by following the
procedure described on next page. (The error code is
displayed when an operation error has occurred. In
normal condition, the error code of the last problem is
displayed.)
Error code
Applicable
model names
To Next Page
Loading...
