To Next PageTo Next PageWhat to do if my Daikin RXB50CV1B unit does not operate?
If your Daikin Air Conditioner isn't turning on, start by checking the power supply and replacing the fuse if necessary. Ensure the power plug is securely connected. Also, verify that the delay timer is correctly set. If the issue continues, it is recommended to contact the air conditioner unit installer.
Why is the air flow too low in my Daikin RXB50CV1B?
If the airflow from your Daikin Air Conditioner is too low, there are several things you can check. First, clean the air filter. Make sure that all doors and windows are closed. Clear any obstructions from the air suction and discharge areas. Finally, increase the regulated temperature.
How to get rid of bad odour from Daikin Air Conditioner?
If the discharge airflow from your Daikin Air Conditioner has a bad odor, it may be due to particles from cigarettes, smoke, or perfume that have adhered to the coil. Clean the coil to remove these odors.
Why is there condensation on the front air grille of my Daikin RXB50CV1B Air Conditioner?
Condensation on the front air grille of your Daikin Air Conditioner's indoor unit can occur due to air humidity after prolonged operation or if the set temperature is too low. Try increasing the temperature setting and operating the unit at a high fan speed.
General| Model | RXB50CV1B |
|---|---|
| Cooling Capacity | 5.0 kW |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Energy Efficiency Ratio (Heating) | 3.61 |
| Refrigerant | R32 |
| Type | Split System Air Conditioner |
| Indoor Unit Noise Level | 39 dB(A) |
Detailed measurements and diagrams for the indoor unit's physical specifications.
Essential safety guidelines for installation, operation, and handling of the unit.
Details methods for cutting, flaring, and connecting refrigerant pipes precisely.
Details wiring requirements, cable sizes, and connection points for power and interconnection.
Covers unique characteristics and handling requirements of R410A refrigerant.
Procedures for vacuuming the system and charging refrigerant accurately.
Lists common faults, their causes, and recommended actions for resolution.
