Need help?Do you have a question about the Daikin RZAG71L7V1B and is the answer not in the manual?
General| Cooling Capacity | 7.1 kW |
|---|---|
| Heating Capacity | 8.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| COP | 3.61 |
| Refrigerant | R32 |
| Outdoor Unit Noise Level | 49 dB(A) |
| Type | Split System |
| Power Supply | 220-240V / 50Hz / 1Ph |
Safety instructions and documentation overview.
Guidance and warnings for installers.
Requirements for selecting a suitable installation location.
Precautions related to refrigerant handling and safety.
Safety guidelines for brine handling and leakage.
Water quality compliance and handling precautions.
Safety measures for electrical connections and wiring.
Details about the document's purpose, target audience, and content.
Information on what to do after the unit box is delivered on-site.
Procedures for unpacking and handling the outdoor unit.
Information on identifying units and combining them with options.
How to identify outdoor unit models and their specifications.
Details on possible options for the outdoor unit.
What to know and do before going on-site for installation.
Requirements and considerations for the installation site.
Guidelines for preparing refrigerant piping installation.
Steps and precautions for preparing electrical wiring.
Workflow and stages for installing the system.
Procedures for opening indoor and outdoor units for access.
Steps and precautions for mounting the outdoor unit securely.
Providing a strong and level installation structure for the unit.
Process of physically installing the outdoor unit onto its structure.
Ensuring proper drainage for condensation water.
Measures to secure the unit against strong winds.
Steps and guidelines for connecting refrigerant piping.
Safety and handling precautions for refrigerant piping.
Best practices for connecting refrigerant pipes and flare nuts.
Recommendations for bending refrigerant pipes gently.
Step-by-step guide for flaring pipe ends correctly.
Procedures and precautions for brazing pipe ends.
How to handle stop valves and service ports safely.
Routing and connecting field piping to the outdoor unit.
Criteria for installing oil traps in refrigerant piping.
Procedures for leak testing and vacuum drying piping.
Safety and operational advice for leak testing.
Setting up equipment for leak testing and vacuum drying.
Method for detecting refrigerant leaks using bubble test.
Step-by-step process for removing moisture from the system.
Procedures for adding refrigerant to the system.
When and how to charge additional or complete refrigerant.
Information on refrigerant type (R32) and safety warnings.
Safety advice and warnings during refrigerant charging.
How to calculate the extra refrigerant needed.
Calculating the total refrigerant needed for recharging.
Procedures for connecting electrical wiring to the unit.
Overview of electrical wiring connection stages.
Ensuring electrical work meets standards and regulations.
Safety warnings for electrical wiring installation.
Best practices for electrical wiring connections.
Specifications for wiring components and their installation.
Detailed steps for connecting wiring to the outdoor unit.
Final steps to complete the outdoor unit installation.
Securing piping, cables, and closing covers.
Procedures for correctly closing the outdoor unit cover.
What to do after installation to commission the system.
Warnings and advice before and during commissioning.
Essential checks to perform before system startup.
Steps for conducting a test run of the system.
Common error codes displayed during test runs and their causes.
Annual checks for the outdoor unit's heat exchanger and performance.
Information on yearly maintenance of the outdoor unit.
Safety measures to follow during maintenance work.
Stages involved in disposing of the system according to regulations.
Functionality of the automatic pump down feature.
Step-by-step guide for performing system pump down.
Contents of the technical data chapter.
Physical dimensions of the outdoor units.
Required service space around the outdoor unit for maintenance.
Identification and location of outdoor unit components.
Schematic diagram of the outdoor unit's piping system.
Electrical wiring diagram for the outdoor unit.
Explanation of symbols used in the wiring diagrams.
Detailed technical specifications for the outdoor units.
To Next Page