Daikin SiBE041010 - Outdoor Unit; Removal of Panels

Outdoor Unit SiBE041010
122 Removal Procedure
2. Outdoor Unit
2.1 Removal of Panels
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1. Appearance features

Take care not to cut your
finger by the fins of the
outdoor heat exchanger.
2. Remove the panels.
1
Remove the screw of
the stop valve cover.
Pull down the stop
valve cover and remove
it.

The stop valve cover is
united with the shield plate.

When reassembling, make
sure to fit the 3 hooks.
(R7940)
DAIKIN
INVERTER
(R7371)
(R12002)
Stop valve
cover
DAIKIN
INVERTER
DAIKIN
INVERTER
(R12003)
Shield plate
Hooks