SiBE041010 Operation Manual
Operation Manual 45
2.3 Adjusting the Airflow Direction
12
Adjusting the Airflow Direction
You can adjust the airflow direction to increase your comfort.
1. Press “SWING button”.
•
2.
• The flap will stop moving.
• “ ” disappears from the LCD.
Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side blades.)
•
1, 2
3, 4
“ ” is displayed on the LCD and the flaps
will begin to swing.
When the flaps have reached the
desired position, press “SWING
button” once more.
To adjust the horizontal
blades (flaps)
To adjust the vertical blades
(louvers)
When the unit is installed in the corner of a room,
the direction of the louvers should be facing away
from the wall.
If they face the wall, the wall will block off the wind,
causing the cooling (or heating) efficiency to drop.
To Next Page
Loading...
