EasyManua.ls Logo

Daikin SkyAir RZQ18PVJU User Manual

Daikin SkyAir RZQ18PVJU
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Service
Manual
RZR-P, RZQ-P(9) Series
Cooling Only / Heat Pump
R-410A 60Hz
SiUS28-902_B

Table of Contents

Questions and Answers:

Daikin SkyAir RZQ18PVJU Specifications

General IconGeneral
BrandDaikin
ModelSkyAir RZQ18PVJU
CategoryAir Conditioner
LanguageEnglish

Summary

Part 1 General Information

1. Safety Considerations

Essential safety guidelines for operating and maintaining the equipment.

1.1 Safety Considerations for Repair

Specific safety procedures and precautions for technicians performing repairs.

1.2 Safety Considerations for Users

Safety advice for end-users to prevent hazards during normal operation.

Part 2 Refrigerant Circuit

1. Refrigerant Circuit

Explains the refrigerant flow and components for different series.

1.1 RZR18 / 24 / 30PVJU RZQ18 / 24 / 30PVJU(9)

Details the refrigerant circuit for specific RZR/RZQ series models.

1.2 RZR36 / 42PVJU RZQ36 / 42PVJU(9)

Details the refrigerant circuit for specific RZR/RZQ series models.

Part 3 Function

2. Basic Control

Explains fundamental control logic for normal operation.

2.1 Normal Operation

Details the normal cooling and heating operation controls.

4. Protection Control

Details various protection mechanisms against abnormal conditions.

4.1 High Pressure Protection Control

Explains protection against high system pressure.

4.2 Low Pressure Protection Control

Explains protection against low system pressure.

4.3 Discharge Pipe Protection Control

Protects compressor internal temperature from discharge pipe issues.

4.4 Inverter Protection Control

Details protection against inverter overcurrent and fin temperature.

Part 4 Test Operation

1. Test Operation

Provides a step-by-step guide for initial system testing after installation.

1.1 Procedure and Outline

Outlines the steps for conducting the initial test operation.

1.1.1 Check Work Prior to Turn Power Supply ON

Checks wiring, refrigerant piping, and charge before applying power.

1.1.2 Turn Power On

Details the procedure for turning on the outdoor and indoor units.

1.1.3 Check Operation

Describes the automatic check operation and error code interpretation.

1.1.4 Confirmation on Normal Operation

Confirms normal operation after check and verifies device functions.

1.2 Operation when Power is Turned ON

Explains system behavior upon initial power application.

1.2.1 When Turning ON Power First Time

Describes the initial power-on sequence for master/address setting.

3. Field Setting

Details how to configure system settings using controllers or switches.

3.1 Field Setting from Remote Controller

Explains how to perform field settings using wired and wireless controllers.

3.1.1 Wired Remote Controller

Provides instructions for setting up wired remote controllers.

3.1.2 Wireless Remote Controller

Provides instructions for setting up wireless remote controllers.

Part 5 Service Diagnosis

1. Symptom-based Troubleshooting

Lists common symptoms and their corresponding supposed causes and countermeasures.

2. Troubleshooting by Remote Controller

Explains how to use the remote controller for self-diagnosis and error checking.

2.1 The INSPECTION / TEST Button

Details modes accessible via the inspection/test button.

2.1.1 BRC1D71

Explains modes for the BRC1D71 remote controller.

2.2 Self-diagnosis by Wired Remote Controller

Explains self-diagnosis procedures for wired controllers.

2.2.1 BRC1D71

Details self-diagnosis for BRC1D71 wired remote controller.

2.2.2 BRC1E71

Details self-diagnosis for BRC1E71 wired remote controller.

2.3 Self-diagnosis by Wireless Remote Controller

Explains self-diagnosis procedures for wireless controllers.

2.4 Inspection Mode

Describes how to enter and use the inspection mode.

2.5 Remote Controller Service Mode

Details how to access and use the remote controller's service mode.

2.5.1 BRC1D71

Instructions for entering service mode on BRC1D71 controller.

2.5.2 BRC1E71

Instructions for accessing maintenance menu on BRC1E71 controller.

2.6 Error Codes and Description

Lists all error codes and their meanings.

3. Troubleshooting by Indication on the Remote Controller

Guides troubleshooting based on error codes displayed on the remote controller.

3.1 External Protection Device Abnormality

Troubleshooting steps for external protection device errors.

3.2 PCB Abnormality

Troubleshooting steps for abnormal PCB conditions.

3.3 Drain Water Level System Abnormality

Troubleshooting steps for drain water level issues.

3.4 Indoor Unit Fan Motor Abnormality

Troubleshooting steps for indoor fan motor problems.

3.6 Electronic Expansion Valve Coil Abnormality

Troubleshooting steps for electronic expansion valve coil problems.

3.7 Drain System Abnormality

Troubleshooting steps for drain system abnormalities.

3.15 High Pressure Abnormality

Troubleshooting steps for high pressure related issues.

3.16 Actuation of Low Pressure Sensor

Troubleshooting steps for low pressure sensor actuation.

3.17 Inverter Compressor Motor Lock

Troubleshooting steps for inverter compressor motor lock.

3.21 Refrigerant Overcharged

Troubleshooting steps for refrigerant overcharge issues.

3.37 Refrigerant Shortage

Troubleshooting steps for refrigerant shortage detection.

Related product manuals