Daikin SUPER MULTI NX FTXS12LVJU - Page 239

Outdoor Unit: 3MXS24JVJU, 4MXS32GVJU SiUS12-928_B
231 Removal Procedure
6. Remove the rear panel.
1
Remove the 2 screw on
the partition plate (2).
2
Slide the partition plate (2)
to the left and remove it.
 When reassembling, bundle
the wires with clamp.
 When reassembling, pass the
wires through the partition
plate (2).
3
Release the holder of the
outdoor temperature
thermistor.
 The holder is secured in the
clearances of the heat
exchanger fins.
Step
Procedure Points
(R10386)
Partition plate (2)
Rear panel
(R10387)
Hook
Room A
Room C Room D
Room B
power supply
Clamp
Partition plate (2)
(R17353)
(R10388)
Outdoor temperature thermistor