SiUS12-928_B Outdoor Unit: 2MXS18GVJU
Removal Procedure 218
6
Disconnect the 2 brazed
points, first (e), and then
(f).
Remove the defrost
solenoid valve.
Note:
Do not use a metal saw for
cutting pipes or sawdust will
enter the circuit.
When withdrawing the pipes,
be careful not to pinch them
firmly with pliers. The pipes
may get deformed.
Provide a protective sheet or
a steel plate so that the
brazing flame cannot
influence peripheries.
Step
Procedure Points
To Next Page
Loading...