SiUS12-928 Outdoor Unit – 2MXS18GVJU
Removal Procedure 174
5
Take off the putty, and
remove each thermistor.
Place the thermistor so that its
end comes up to the end of
the fixture.
Be careful not to lose the clip
or fixture for thermistors.
6
Remove the wire
harnesses.
S90:
Outdoor temperature thermistor
(Blue)
Outdoor heat exchanger
thermistor (Gray)
Discharge pipe thermistor (Black)
S92: Gas pipe thermistor
Room A (Black)
Room B (Gray)
S93: Liquid pipe thermistor
Room A (Black)
Room B (Gray)
Step
Procedure Points
To Next Page
Loading...
