Need help?Do you have a question about the DAISHIN CORAL SCR252M2 and is the answer not in the manual?
Explains the meaning of the CAUTION symbol for potential injury and the need to read associated messages.
Explains the meaning of the WARNING symbol for severe personal injury or loss of life if instructions are not followed.
Study all instructions thoroughly to understand operation for safety, performance, and longevity.
Ensure all operators are properly instructed on safe machine operation.
Observe safety regulations for fuel handling, use safety containers, and handle spills carefully.
Never operate in explosive atmospheres or near combustible materials with insufficient ventilation.
Ensure the machine is on secure footing to prevent shifting and injury, considering suction hose effects.
Keep the immediate working area free from bystanders.
Ensure nothing is in position to be hit by operator's hand or arms during starting.
Avoid contact with hot exhaust, muffler, cylinder, and keep clear of all rotating parts.
Stop the engine and disconnect the spark plug wire before working on the machine.
Always attach the suction strainer to the end of the suction hose; never use the pump without it.
Centrifugal pumps require clean water for priming. This process takes 60-150 seconds.
Lay planking alongside hoses on roadways to prevent vehicles from damaging them or causing water hammer.
Drain pump casing after use to prevent impeller rust and freezing damage, especially in winter.
General| Model | SCR252M2 |
|---|---|
| Category | Water Pump |
| Voltage | 220V |
| Frequency | 50/60Hz |
| Type | Submersible |
| Discharge Bore | 25mm (1") |
| Inlet/Outlet Size | 25mm (1") |
To Next Page