Wired Controller XK46
36
6.5.1 General Timer
Unit On/Off after a desired hour can be set through general timer.
Set Timer: when timer is not set, press TIMER button to enter timer setting
and “HOUR” icon is blinking. Press “ ” or “ ” button to adjust timer time. Press
TIMER button to save the setting and then exit setting.
Cancel Timer: when timer is set, press TIMER button to cancel it.
Timer setting range: 0.5~24h. Pressing “ ” or “ ” button increases or
decreases timer time by 0.5h; holding “ ” or “ ” button increases or decreases
timer time by 0.5h every 0.3s.
In unit On status, timer Off setting is as shown in fig. 6.5 or 6.6.
To Next Page
Loading...
