Need help?Do you have a question about the Dakota Alert MURS Alert and is the answer not in the manual?
General| Frequency | 151.820 MHz, 151.880 MHz, 151.940 MHz, 154.570 MHz, 154.600 MHz |
|---|---|
| Channels | 5 |
| Power Output | 2 Watts |
| Type | Transmitter |
| Range | Up to 2 miles |
| Battery Type | Alkaline |
| Power Source | Battery |
Ensures compliance with FCC RF exposure guidelines requiring a minimum 2-inch separation distance from the antenna.
States the transmitter must have the antenna connected and must accept interference per FCC rules.
Describes the transmitter as a PIR detector for people, vehicles, or animals, transmitting signals upon detection.
Guide for opening the case, attaching the antenna to the jack, and identifying components.
Details powering the transmitter with 6 AA batteries, recommended types, and factors affecting battery life.
Recommendations for mounting the transmitter 20 feet back and 3-4 feet off the ground for optimal detection.
Explains the four distinct alert signals and how to change them for zone identification.
Procedure to open the case and locate the radio transmitter and its various switches.
Details how to locate and use the 4-position alert zone message switch for settings.
Instructions for selecting MURS channels and CTCSS sub-channels using DIP switches.
Provides phone number and hours for customer support and troubleshooting assistance.
Defines the one-year warranty coverage, exclusions like accident or abuse, and repair process.
Provides the physical address and contact information for returning the product for service.
To Next Page
