SYHA TIME CLOCK OPERATION INSTRUCTIONS
PRE-GAME
• Use buzzer to notify refs and teams when Zamboni door is closed.
• When both teams have taken the ice, set the clock for a 4 minute pre-game
warm-up. Press , then enter 4000 on the number keypad, then press
and then press .
• When there is 1 minute left, the referee will blow whistle for players to head for
bench.
• After buzzer goes off, set clock to proper period length – see page 4 for level
specific period time lengths. Using a 12 minute period for this example,
press , then enter 12000 on the number keypad then press ..
Make sure the proper time appears on the main scoreboard. You are now ready
to start the game.
GAME PLAY
• Referee will look at both goalies then the time keeper – you must acknowledge
the referee with a nod so they can drop the puck to start the game.
• In general, press to start the clock on a puck drop and press