Swimming Mode Menus & Settings
54
Split Hold Time
Select Split Hold Time to congure how long the split times
remain on the display. The Split Hold Time can be set from
1-99 seconds. The default time is 15 seconds.
SPLIT HOLD TIME
TIME= ^5*
From Main Menu – [4]>[3]>[2]>[2]
Press the [0]–[9] keys to enter the number of seconds and then press [ENTER] to save.
Note: For splits, only the rst place split will display and hold for the amount of time set in
the Split Hold Time menu. Finish times will page according to the amount of time
set in the Finish Page Time menu.
Finish Page Time
This menu congures how long (0 to 99 seconds) each page
of the Finish Times will hold on the display.
FINISH PAGE TIME
TIME: ^5*
From Main Menu – [4]>[3]>[2]>[3]
Press the [0]–[9] keys to enter the appropriate length of time the nish time will appear on
the display and then press [ENTER] to save. The default time is 5 seconds.
Results Order
This menu congures the console to display results in either
Lane Order (default) or Place Order. If the number of lanes
in the pool is greater than the number of lines congured
for the display, the timer will display the information in place
order regardless of this setting.
RESULTS ORDER
ORDER-LANE *
From Main Menu – [4]>[3]>[2]>[4]
RESULTS ORDER
ORDER-PLACE*
Use [←][→] to select either LANE or PLACE and then press [ENTER] to save.
When to use this:
• Select LANE to display the results in the order of the lane in which the swimmers
nished.
• Select PLACE to display the results in the order of which the swimmers placed.
Subtractive Splits
This setting congures the console to display only the
cumulative split or the rst subtractive split followed by the
cumulative split on the display. The default is NO.
SUBTRACTIVE
SHOW= NO *
From Main Menu – [4]>[3]>[1]>[5]
SUBTRACTIVE
SHOW= YES*
MENU-RTD/MATRIX
2-SPLT HOLD TIME
MENU-RTD/MATRIX
3-FIN PAGE TIME
MENU-RTD/MATRIX
4-RESULTS ORDER
MENU-RTD/MATRIX
5-SUBTRACTIVE
To Next Page
Loading...
