EasyManua.ls Logo

Daktronics OMNISPORT 2000 - Insert Event

Default Icon
182 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Diving Mode Operation, Menus, & Settings
70
The OmniSport 2000 timer holds up to 500 events in numbered locations. The locations
allow the events to be entered in any order (example: event 001, 012, 035). An alpha
character (A-Z) may also be added (example: 001A). Event locations have been
numbered from 1 to 500. The asterisk (*) indicates it is OK to press [ENTER] and begin to
edit this event location. Use [↑][↓] to select the event location number. Press [ENTER] when
the location number to be edited is shown. Press [CLEAR] to return to the menu selection.
Continue through the Event Order settings by pressing [ENTER] after each setup. Press the
[0]–[9] keys to change the event number. Use [←][→] to set the event’s alpha designator
and press [ENTER] to accept. Use [←][→] to change the round type (nal, semi-nal,
prelim, blank), then press [ENTER] to accept.
#001= EVT: 001 *
RND= (BLANK)
#001= EVT: 001
RND= FINAL *
Enter a distance of “0” to insert a diving event and show the dive order (A, B, C, or D) set
for that event.
#001= EVT: 001
DISTANCE= ^^^0*
#001= EVT: 001
DIVE ORDER= B
When to use this:
If the console is not connected to a results program that downloads the event order.
If the console is not connected to a computer running the OmniSport Pro Swimming
software.
Insert Event
This group of menus is used to insert an event into the event
order.
INSERT BEFORE
#001* E:001 R:P
From-Main Menu – [2]>[2]>[2]
Use [↑][↓] to select the event location number where the new event will be inserted.
Press [ENTER] when the location number is shown.
#001= EVT: 001 *
RND= (BLANK)
Press the [0]–[9] keys to change the Event Number. Use [←][→] to change the event’s
alpha designator and press [ENTER] to accept. Use [←][→] to change the round type
(nal, semi-nal, prelim, or blank) and press [ENTER] to accept. Subsequent events shift to
new locations.
#001= EVT: 001
RND= FINAL *
Enter a distance of “0” to insert a diving event and show the dive order (A, B, C, or D) set
for that event.
#001= EVT: 001
DISTANCE= ^^^0*
#001= EVT: 001
DIVE ORDER= B
MENU-EVENT ORDER
2-INSERT EVENT
From Main Menu – [2]>[2]>[↓]

Table of Contents

Other manuals for Daktronics OMNISPORT 2000

Related product manuals