Daktronics OMNISPORT 2000 - Setup Printer Menu

Diving Mode Operation, Menus, & Settings
78
Setup Printer Menu
This menu congures which printouts will be printed on the
built-in printer in the console as well as the intensity of the
print on those printouts.
Dive Log
The Dive Log menu allows dive logging to be turned ON/
OFF. Typically the Dive Log is set ON.
MENU-PRINTER
DIVE LOG: ON*
From Main Menu – [4]>[4]>[1]
Use [←][→] to toggle dive logging ON or OFF and then press [ENTER] to save.
When to use this:
• Using the Dive Log is the most thorough way to identify issues with the system.
Daktronics recommends that the Dive Log is always turned on. As scores are
accepted, the printer will print the results (Figure 53).
Intensity
This menu sets the printer’s contrast for easy readability.
The typical level is 5.
PRINT INTENSITY
LEVEL 1-5: 5*
From Main Menu – [4]>[4]>[2]
Press the [1]–[5] keys to select the print intensity and press [ENTER] to save.
MENU-SETUP
4-PRINTER
MENU-PRINTER
1-DIVE LOG
From Main Menu – [4]>[4]
Figure 53: Dive Log Printout
MENU-PRINTER
2-INTENSITY