Daktronics VIP-5000 Series - Stored Content; Blank

Conguration
15
Test Pattern Description
Rotate Columns
Displays scrolling red, green, and blue one-pixel-width vertical lines
from left to right across the display
Rotate Rows
Displays scrolling red, green, and blue one-pixel-width horizontal lines
from top to bottom across the display
Daktronics Logo
Displays an alternating red, green, and blue D and border on each
display module
Calibration Corners
Displays a pattern of dots on the corners of every module to aid in eld
calibration
Calibration Half On Displays a RGB sequence with reduced brightness for eld calibration
Bit Test
Displays an alternating red, green, and blue pattern that fades in
across the display
Stored Content
Select Stored Content from the drop-down list to use locally stored image les as the
input source. Refer to Section 6: Stored Content (p.37) for supported image le types
and instructions for uploading content. Stored content must be available for the Stored
Content display mode to function. Refer to Figure 20.
The Minimum Hold Time sets how long the stored content is displayed.
Figure 20: Input - Stored Content Display Mode
Change the Color Adjustment settings, the Source Dimensions, and the Target
Dimensions as described in DVI (p.11).
Blank
Select Blank from the drop-down list to cause the display to show a blank output.