EasyManuals Logo

Dali ALTECO C-1 User Manual

Dali ALTECO C-1
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
9
UK DE DK JP CN FR
4.0 coNNectIoN
Correct, tight connections to your amplifier are extremely important for your listening experience.
Always use cables of the same type and length for left and right channels. We recommend using
special speaker cables from DALI, available from your dealer.
Connection in correct phase is a detail that is often ignored. The red (+) terminal of the
amplifier must be connected to the red (+) terminal of the loudspeaker. The black (-) terminal
of the amplifier must be connected to the black (-) terminal of the loudspeaker. Even a single
loudspeaker connected out-of-phase in a stereo or surround installation will make the bass
weaker and the stereo image unfocused.
For the optimal listening experience, the right loudspeaker (as seen from the listening position)
must be connected to the amplifier output terminals marked “R” or “Right”. The left loudspeaker
must be connected to the amplifier output terminals marked “L or “Left”.
NOTE: Before connecting cables or changing any connections, ALWAYS turn off your amplifier.
NOTE: Make sure that the bare conductors are tightly gripped by the terminals with no loose
wires which could cause a short circuit and damage the amplifier (see Figure 4).
NOTE: If you are using DALI ALTECO in a surround system, follow the instructions included with
your surround amplifier.
5.0 RUNNING-IN
Like any mechanical system, a loudspeaker requires a “running-in” period to perform at its
best. You will experience a gradual increase in sound quality during the first period of use. The
break-in period will vary depending on use and playback volume. You should expect up to 100
hours of playback until maximum performance is reached. Unlike other mechanical systems,
the life-span of a loudspeaker is increased by normal, regular playback of music.
6.0 cLeANING AND MAINteNANce
Clean the cabinets with a soft, dry cloth. If the cabinets are dirty, wipe with a soft cloth dipped in
all-purpose cleaner and then well wrung out. Be very careful when wiping the speaker cones,
as they are very fragile. Front grilles can be cleaned with a clothes brush and wiped with a
wellwrung, lint-free cloth and mild all-purpose cleaner.
6.1 AVOID DIRECT SUNLIGHT:
The surfaces of the speakers may fade or become discoloured over time when exposed to
direct sunlight. Therefore avoid positioning the speakers in direct sunlight.
7.0 DISPoSAL
If you want to dispose of this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling. Private households in the EU member states,
Switzerland, Liechtenstein and Norway may return their used electronic products free of charge
to designated collection facilities or to a retailer (if you purchase a similar new one). If you reside
in countries not mentioned above, please contact your local authorities for the correct method
of disposal. By following this process, you will ensure that your disposed product undergoes the
necessary treatment, recovery and recycling and thus prevent potential negative effects on the
environment and human health.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dali ALTECO C-1 and is the answer not in the manual?

Dali ALTECO C-1 Specifications

General IconGeneral
Product colorBlack
Recommended usageUniversal
Multi-Room Streaming (MRS) support-
TweeterYes
Speaker type2-way
Tweeter diameter21 mm
Number of drivers2
Speaker enclosureClosed
Speaker placementWall-mountable
Audio output channels2.0 channels
Number of tweeter drivers1
Impedance6 Ω
Sensitivity83 dB
Frequency range74 - 25000 Hz
RMS rated power- W
Crossover frequency2100 Hz
Signal-to-Noise Ratio (SNR)103 dB
Recommended amplifier power (max)100 W
Recommended amplifier power (min)40 W
Connectivity technologyWired
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width160 mm
Height265 mm
Weight2900 g

Related product manuals