Dali speakers - Surround sound connection

The same guidelines apply irrespective of the number of speakers in your
sound system: speakers positioned to the right must be connected to the
amplier output terminal marked "R" or "Right", and any to the left must
be connected to "L" or "Left".
You must ensure that the cable ends are
rmly pushed into the terminals, and
that there are no loose wires, which
could cause a short circuit and damage
the amplier. (Fig. 2)
Surround sound ampliers have
similar output terminals to stereo
speakers, usually labelled "Front",
"Centre" and "Rear". (Fig. 3)
For further information, please
refer to the manual.
Using inferior cables for your new DALI speakers is just the same as putting
cheap tyres on a thoroughbred racing car. Using cables from DALI, which
have been specially designed, will ensure a perfect sound experience every
time.
Fig. 3. Surround connection
WAVE
Talk to your authorised DALI dealer about cables - or visit www.dali.dk
5
English
Fig. 2. Terminal connection