Name: dallmeier PANOMERA S4
Brand: dallmeier
Rating: 4 (1 reviews)

To Next Page

panomera® S4/8

INSTALLATION OF A PANOMERA® AIR BLAST KIT ON A PANOMERA® S4/8

Replacing the sealing rubber on a

Panomera® S4/8

▶

Loosen the four front screws of

the camera cover counterclockwise

using an Allen key (5).

NOTE

Wear gloves for disassembly to protect

camera glass and lenses.

▶

Remove the camera cover from the

housing and place it on a soft surface.

Other manuals for dallmeier PANOMERA S4

Questions and Answers:

Need help?

Do you have a question about the dallmeier PANOMERA S4 and is the answer not in the manual?

General

Sensor Type	CMOS
Lens Type	Fixed Focal Length
Frame Rate	up to 30 fps
Day/Night Functionality	Yes
IR Cut Filter	Yes
Wide Dynamic Range (WDR)	Yes
Alarm I/O	Yes
Operating Temperature	-30°C to +60°C
Ingress Protection	IP66
Vandal Resistance	IK10
Camera Type	Panoramic Camera
Field of View	up to 180°
Focal Length	Varies depending on model and FOV requirements
Image Sensor Size	1/1.8"
Video Compression	H.264, H.265
Audio	Optional
Network Interface	Ethernet
Power Supply	PoE+
Mount Type	Ceiling, wall