Need help?Do you have a question about the dallmeier SMAVIA DMS 2400 II and is the answer not in the manual?
Describes the content and target audience of the commissioning document.
Lists other applicable documents like Data Sheet and Configuration.
Specifies that installation, commissioning, etc., must be done by qualified personnel.
Advises to inform about and comply with local laws for surveillance systems.
Emphasizes using only tested and approved Dallmeier components to avoid issues.
Warns against unauthorized hardware/software modifications which void warranty.
Warns about condensation from temperature changes causing malfunctions.
Stresses the mandatory nature of proper earthing and bonding for safety and EMI immunity.
Advises on protective measures against lightning surges for device protection.
Discusses how unfavorable conditions can shorten device life and cause issues.
Instructs to disconnect power if foreign bodies enter or burnt smell/smoke is detected.
Warns about shocks and states only qualified personnel can open the device.
Instructs not to dispose of e-waste in household trash and return to sales partner.
Lists the items included in the standard package and potential variations.
Provides guidelines for storing and shipping the device in original packaging.
States warranty terms and describes the device's intended use and capabilities.
Lists device certifications and provides FCC compliance notes for the USA.
Specifies stand-alone operation, preferred installation locations, and warnings about unfavorable conditions.
Details voltage requirements and the recommendation for using a UPS.
Explains rack installation requirements, including space, ventilation, and stability.
Provides the physical dimensions of the device.
Details requirements for stable positioning and necessary ventilation space around the device.
Lists required tools (T10 screwdriver) and HDD specifications for mounting.
Crucial safety notice to disconnect the device from the mains supply before mounting.
Outlines the steps for mounting the HDD, including tray placement and screw securing.
Covers inserting the HDD tray into the housing, locking it, and the device initialization process.
Explains the function of LEDs and the display on the front of the device.
Details the specific information displayed on the device screen and its components.
Provides a comprehensive list and description of all physical ports on the device.
Details the pin assignments for serial interfaces, contact inputs, relay outputs, and audio inputs.
Outlines the initial steps for connecting the device and starting it up for local access.
Explains the recorder login dialogue and accessing the configuration interface.
Details connecting the device to the network and power for remote configuration.
Explains how to log in remotely using the serial number and initiating NetConfig3.
Describes entering the serial number as a password and accessing the configuration interface for remote setup.
Lists the internal components and available interfaces of the device.
Details electrical, mechanical (dimensions, weight), and environmental operating data.
Highlights warnings for electric stroke and battery replacement during maintenance.
Provides guidelines for cleaning the device safely using a soft cloth and no detergents.
To Next Page
General